
Manual rear-feeding seam welder machine for conical round tin can
This metal canning equipment, manual rear-feeding seam welder machine for conical round tin can, is a necessary processing equipment for manufacturing food cans and chemical barrels. The operator only needs to put the trimmed iron sheet into the designated position, and the equipment automatically turns the iron sheet into a circle, which is used with the semi-automatic seam welding machine.
Model | GNWT-286S | GNWT-180S |
Linear rate of welding | 5-30m/min | |
Production capability | 10-20mm | 8-15mm |
Can body diameter | D50-400mm | D52-180mm |
Can body hight | 190-420mm | |
Applicable materical | Tinplate Steel-based | Tinplate Steel-based |
Applicable materical thickness | 0.22-0.42mm | 0.18-0.42mm |
Seam welding landing | 0.8mm 1.0mm 1.2mm | 0.6mm 0.8mm 1.2mm |
Seam point distance | 0.5-0.8mm | |
Applicable copper wire diameter | Φ1.38mm Φ1.5mm | Φ1.38mm |
Cooling water | Temperature:20℃ Pressure:0.4-0.5Mpa Discharge:7L/min | |
Total power | 18KVA | |
Power supply | 380V±5% 50Hz | |
Machine dimension | 1200*110*1800mm | |
Gross weight | 1200kg |
