10L-20L Square Can Production Line
The production line is suitable for the automatic production of 18 liters’square can. total powder: approx.35KW,total floor space: 65㎡ .total length:approx.15 meters. total manpower: 8-9 people. Production capacity: 15-20cpm. Square can’s height range: 170-450mm. Square can’s diameter range:300-320mm
Technical flow: cutting the tin sheet to blank-rounding-welding-manual coating-square expanding&panel and corner embossing-upper flanging-lower flanging-bottom seaming-top seaming-packaging
What’s the small square can?
It is made of three pieces of metal sheet (mostly tinplate), the can body, the bottom and the lid. The can is square shaped. The small square can range: capacity 1-5L, diagonal 160-220mm, height 120-360mm.
Equipment composition of semi-automatic 10l-20l square can production line
GT1B5B Can Slitting Machine

Maximum thickness of cutting iron sheet | 0.18-0.5mm |
Maximum width of cutting iron sheet | 1000-1250mm |
Minimum width of cutting sheet | 40mm |
Motor Power | 1.65KW |
Dimensions(L*W*H) | (1470)1720×1000×1100mm |
Device Weight | 1200-1500KG |
Automatic Rolling Machine

Power supply | AC380V/50HZ |
total power | 0.75KVA |
thickness | 0.2-0.4mm |
pneumatic system pressure | 40L/min Mpa |
can height range | 120-400mm |
diameter range | Φ105-286mm |
rounding speed | 40m/min |
Dimensions(L*W*H) | 1500*700*1500mm |
Rear-feeding seam welder machine

WeldingSpeed: | 6~12m/min(weldingpowerfrequency:50~240Hz) |
Capacity: | 10~50cans/min |
Diameter: | Φ52~180mm、Φ65~290mm |
Height: | 70~270mm、70~420mm |
Material: | 50#~100#Tinplateplate、steelbaseplate |
Thickness: | 0.18~0.38mm |
Overlap: | 0.4~1.2mm |
Controlway: | PLC |
Coolingwater: | ≤20℃ |
Waterflow: | 20L/min |
Waterpressure: | 5kg/cm² |
Installationcapacity: | 16KVA |
Dimensions(L*W*H) | 1350×1450×1900mm |
Device Weight | 1200kg |
YX-18LC square can body flanging machine

Production range | 9-20L |
maximum oil pressure | 13Mpa |
thickness | 0.23-0.30mm |
pneumatic system pressure | 0.4-0.8Mpa |
production capacity | 15-20cpm |
Fuel tank capacity | 125L |
Motor Power | 7.5KW |
Dimensions(L*W*H) | 1400×730×1200mm |
Power supply | 380V-415V 50HZ |
Device Weight | 1280KG |
YX-18LF square can flanging machine

Production range | 1-18L |
thickness | 0.2-0.35mm |
production capacity | 20-30cmp |
Dimensions(L*W*H) | 1130×700×960mm |
Motor Power | 3.75KW |
Device Weight | 420KG |
GT4A28Q Pneumatic tin can sealer

Production capacity (cpm) | 12-16cpm |
diagonal range | 50-300mm |
can height range | 50-400mm |
thickness | ≤0.4mm |
pneumatic system pressure | 0.4-0.8Mpa |
Motor Power | 2.2KW |
Rotating speed | 940rpm |
Dimensions(L*W*H) | 980×580×1900mm |
Device Weight | 800KG |
The layout of the production line

Tin can making artcraft
