1-5L Rectangular Can Production Line
The production line is suitable for the automatic production of 1 liter to 5 liters’ rectangular can. total powder: approx.33KW,total floor space: 65㎡ .total length:approx.15 meters. total manpower: 8-9 people. Production capacity: 12-16cpm. Rectangular can’s height range: 80-350mm. Rectangular can’s diameter range：50-190mm
Technical flow: cutting the tin sheet to blank-rounding-manual coating-rectangle expanding-upper flanging-lower flanging-bottom seaming-top seaming-packaging
What’s the small square can?
It is made of three pieces of metal sheet (mostly tinplate), the can body, the bottom and the lid. The can is square shaped. The small square can range: capacity 1-5L, diagonal 160-220mm, height 120-360mm.
Equipment composition of semi-automatic 1-5l rectangular can production line
GT1B5B Can Slitting Machine
| Maximum thickness of cutting iron sheet | 0.18-0.5mm |
| Maximum width of cutting iron sheet | 1000-1250mm |
| Minimum width of cutting sheet | 40mm |
| Motor Power | 1.65KW |
| Dimensions(L*W*H) | （1470）1720×1000×1100mm |
| Device Weight | 1200-1500KG |
Automatic Rolling Machine
| Power supply | AC380V/50HZ |
| total power | 0.75KVA |
| thickness | 0.2-0.4mm |
| pneumatic system pressure | 40L/min Mpa |
| can height range | 120-300mm/120-400mm |
| diameter range | Φ52-105mm/Φ105-286mm |
| rounding speed | 40m/min |
| Dimensions(L*W*H) | 1500*700*1500mm |
Rear-feeding seam welder machine
| WeldingSpeed： | 6~12m/min（weldingpowerfrequency：50~240Hz） |
| Capacity： | 10~50cans/min |
| Diameter： | Φ52~180mm、Φ65~290mm |
| Height： | 70~270mm、70~420mm |
| Material： | 50#~100#Tinplateplate、steelbaseplate |
| Thickness： | 0.18~0.38mm |
| Overlap： | 0.4~1.2mm |
| Controlway： | PLC |
| Coolingwater： | ≤20℃ |
| Waterflow： | 20L/min |
| Waterpressure： | 5kg/cm² |
| Installationcapacity： | 16KVA |
| Dimensions(L*W*H) | 1350×1450×1900mm |
| Device Weight | 1200kg |
3F3Y Rectangle forming machine
| production capacity | 20-30cmp |
| Scope | 1-5L |
| Motor Power | 5.5KW |
| hydraulic system working pressure | 4-6mpa |
| Device Weight | 600KG |
| Dimensions(L*W*H) | 1300×700×1200mm |
YX-18LF rectangle flanging machine
| Production range | 1-18L |
| thickness | 0.2-0.35mm |
| production capacity | 20-30cmp |
| Dimensions(L*W*H) | 1130×700×960mm |
| Motor Power | 3.75KW |
| Device Weight | 420KG |
GT4A28Q Pneumatic tin can sealer
| production capacity | 12-16cpm |
| diagonal range | 50-300mm |
| can height range | 50-400mm |
| thickness | ≤0.4mm |
| pneumatic system pressure | 0.4-0.8Mpa |
| Motor Power | 2.2KW |
| Rotating speed | 940rpm |
| Dimensions(L*W*H) | 980×580×1900mm |
| Device Weight | 800KG |
The layout of the production line
Tin can making artcraft
