0.1L-5L Round Can Production Line
The production line is suitable for the automatic production of 0.1 liter to 5 liters’ small round can. total powder: approx.71KW,total floor space: 65㎡ .total length:approx.15 meters. total manpower: 8-9 people. Production capacity: 25-30cpm.Small round can’s height range: 50-300mm. Small round can’s diameter range：50-180mm
Technical flow: cutting the tin sheet to blank-rounding-welding-manual coating-flanging-bottom seaming-top seaming-ear lug welding-packaging
What is a small round can?
It is made of three pieces of metal sheets (mostly tinplate) of cans body, cans bottom and cans cover, and the cans body is round. Range of small round cans: capacity 0.1-5l, diameter 50-180mm, height 50-300mm.
Equipment composition of semi-automatic 0.1-5L round can production line
GT1B5B Can Slitting Machine
| Major technical parameters | |
| Maximum thickness of cutting iron sheet | 0.18-0.5mm |
| Maximum width of cutting iron sheet | 1000-1250mm |
| Minimum width of cutting sheet | 40mm |
| Motor Power | 1.65KW |
| Dimensions(L*W*H) | （1470）1720×1000×1100mm |
| Device Weight | 1200-1500KG |
Automatic Rolling Machine
| Power supply | AC380V/50HZ |
| total power | 0.75KVA |
| thickness | 0.2-0.4mm |
| pneumatic system pressure | 40L/min Mpa |
| can height range | 120-300mm/120-400mm |
| diameter range | Φ52-105mm/Φ105-286mm |
| rounding speed | 40m/min |
| Dimensions(L*W*H) |
Rear-feeding seam welder machine
| WeldingSpeed： | 6~12m/min（weldingpowerfrequency：50~240Hz） |
| Capacity： | 10~50cans/min |
| Diameter： | Φ52~180mm、Φ65~290mm |
| Height： | 70~270mm、70~420mm |
| Material： | 50#~100#Tinplateplate、steelbaseplate |
| Thickness： | 0.18~0.38mm |
| Overlap： | 0.4~1.2mm |
| Controlway： | PLC |
| Coolingwater： | ≤20℃ |
| Waterflow： | 20L/min |
| Waterpressure： | 5kg/cm² |
| Installation capacity： | 16KVA |
| Dimensions(L*W*H) | 1350×1450×1900mm |
| Device Weight | 1200kg |
QD Pneumatic flanging Machine
| production capacity | 25-30cpm |
| diameter range | 40-180mm |
| can height range | 50-300mm |
| thickness | ≤0.3mm |
| air cylinder | 100×70mm |
| pneumatic system pressure | 4-6kg f/cm2 |
| Dimensions(L*W*H) | 500×500×1700mm |
| Device Weight | 280kg |
GT4A68Q Pneumatic round can seamer
| production capacity | 20-30cpm |
| diameter range | 50-180mm |
| can height range | 50-300mm |
| thickness | ≤0.4mm |
| pneumatic system pressure | 0.4-0.8Mpa |
| Motor Power | 1.5KW |
| Rotating speed | 1400rpm |
| Dimensions(L*W*H) | 720×520×1760mm |
| Device Weight | 450KG |
Auto feeding Double spot welder
| production capacity | 20-25cpm |
| electrode pressure | 1250N |
| diameter range | Φ126-176mmn |
| load rate | 20% |
| primary current | 100A(Instantaneous） |
| air pressure | 0.5Mpa |
| air consumption | 200L/min |
| Device Weight | 380KG |
| Dimensions(L*W*H) | 1300*1000*1050mm |
| total power | 50KVA |
| Power supply | 380-440V |
The layout of the production line
Tin can making artcraft
