1.Iron material: Generally, after confirming the order, the most suitable iron material, iron material type, size, etc. will be ordered according to the recent layout drawing. The iron material is usually stored directly in the printing plant. The quality of the iron material can be usually visually inspected. The method is to check whether there are scratch marks on the surface, whether the lines are uniform, whether there are rust spots, etc., the thickness can be measured with a micrometer, and the hardness can be felt by hand.
2.Printing: After the film and typesetting drawings are given to the printing factory, the printing factory arranges imposition printing. Usually, the printing factory will provide a template for the printing factory to follow the color. During the printing process, pay attention to whether the printing color can keep up with the template and set the position. Whether it is accurate, whether there are stains, whether there are scars, etc. The printing houses generally responsible for these problems can control themselves.
3.Cutting: After the printed iron material is returned to the factory, it can be cut and cut according to the row of cutting beds. When cutting the mattress, pay attention to whether the operator cuts according to the knife edge line and whether the length is consistent and uniform. Whether workers scratch each other when unloading, etc., the quality must be checked at the initial operating station.
4.Stamping: It is to press the iron sheet into shape on the punching machine. This is the most important work of making cans. Usually, a can can be completed in many processes. The general process of the two-piece can of Tiandi Lid is: Lid: opening-flashing-winding. Bottom cover: cutting-flashing-pre-coiled line-coiled line. The process of lid and bottom closure (bottom closure) of the can, the lid: opening-flashing-winding. Body: opening-pre-bending-cutting corners-forming-button bone-punching (bottom closure)-back cover. The bottom process is: cutting
If the can is hinged, then the lid and the body will each have one more process: hinge.
In the stamping process, the product loss is usually the biggest. Pay attention to whether the work operation is standardized, whether the product surface is scratched, whether there are batch seams in the winding line, and whether the button bones are fastened. The usual practice is to arrange before the mass production. The production of large samples is confirmed, and production is carried out according to the confirmed large samples, which can reduce a lot of trouble.
5.Packaging: After the production is completed, the packaging department is responsible for cleaning and assembling, putting in plastic bags and packing. This link is the finishing touch of the product. The cleanliness of the product is very important. Therefore, it is necessary to do a good job of cleaning before packaging, and then package according to the packaging method. For products with many styles, the style number and box mark must be matched. put. In the packaging process, attention should be paid to minimize the influx of defective products into the finished product, and the packing quantity must be accurate.
